Classical Acrylgel

Our ArchiTECHture Gel - also known as Acrylgel/PolyGel - is a hybrid formula that combines the strength of acrylic with the flexibility of gel. Easy to control, durable and versatile, it’s the perfect choice for overlays or extensions using tips or forms.

• Rubber Base coat required
• For Professional Use Only

To see the full list of ingredients (SDS) click here.

Nail Preparation: For maximum adhesion we recommend thorough dry prep. Use a 150-grit file or sanding band (for HEMA-Free) or a 180-grit file or sanding band (for HEMA) to lightly etch the nail plate. Scrub the entire nail plate with a lint-free wipe and nail cleanser. We also recommend using our Acid Free Primer - apply sparingly and allow 60s to dry.

Natural Nail Overlay Application:

1. To ensure good adhesion, scrub a layer of Rubber Base Coat or Foundation Gel into the nail plate. DO NOT CURE. Apply a small bead over the top to give you an even layer. Cure for 60s.
2. Take a small bead of Acrylgel and place it onto the nail. Dip your brush into the Slip Solution and wipe any excess off. Using the brush, gently pat and pull the acrylgel into place. Cure for 60s or 99s low heat mode.
3. If the overlay is only on a short natural nail, you can apply this in one bead however, for a longer overlay, apply in two layers to avoid undercuring.
4. Remove the inhibition layer using nail cleanser and refine where necessary.