Frankie Builder Gel

Our Builder Gel is the perfect choice for clients needing extra strength and durability, especially those with weaker or brittle nails. With a self-levelling, 100% gel formula, it delivers flawless overlays that last.

• Rubber Base coat required
• Size: 15ml Bottle
• For Professional Use Only

To see the full list of ingredients (SDS) click here.

Nail Preparation: For maximum adhesion we recommend thorough dry prep. Use a 150-grit file or sanding band (for HEMA-Free) or a 180-grit file or sanding band (for HEMA) to lightly etch the nail plate. Scrub the entire nail plate with a lint-free wipe and nail cleanser. We also recommend using our Acid Free Primer - apply sparingly and allow 60s to dry.

Natural Nail Overlay Application:

1. To ensure good adhesion, scrub a layer of Rubber Base Coat or Foundation Gel into the nail plate. DO NOT CURE. Apply a small bead over the top to give you an even layer. Cure for 60s.
2. Apply a thin layer of Builder Gel and DO NOT CURE. This is a slip layer that acts as a guide to help your next bead of gel flow evenly across the surface.
3. Place a bead of Builder gel on top of your slip layer and use your brush to guide the gel into place. Cure for 60s or 99s low heat mode.
4. If a larger apex is required, do not apply a larger bead - apply in two layers to avoid undercuring.
5. Remove the inhibition layer using nail cleanser and refine where necessary.